Products and technical tables

Moulded composite grating, mini mesh, stair treads, platform panels and drainage gratings. Sizes, surfaces, colours and load values on one page.

Get a quote Open the technical table Installation guide Catalogue (PDF, Turkish)
Studio image of a grey moulded composite grating panel showing its mesh structure and cross-section

Moulded composite grating

Our main product. Glass fibre is combined with polyester resin in a mould to form a square-mesh panel with bidirectional strength.

  • 38×38 mm mesh: heights H25, H30, H38, H50 and H58
  • 50×50 mm mesh: height H50
  • Resin: polyester as standard; other resin systems to suit the project
  • Cut on site with a circular saw, fixed to the structure with M-type clips
Grey moulded composite grating panels stacked on the factory floor, square mesh in close-up
Dimensioned technical drawing of a grating module, 38×38 mm mesh, 30 mm high

38×38 mesh models

38×38 mesh models
ModelBar top / bottom (mm)Mesh (mm)Open areaWeightStandard panel (mm)
38×38 H256.5 / 538×3868%~12.5 kg/m²1000×4040
38×38 H306.5 / 538×3868%~14 kg/m²1000×4040
38×38 H386.5 / 538×3868%~18.5 kg/m²1220×3660, 1000×3000, 1000×4040
38×38 H5011 / 838×3874%~36 kg/m²1000×4040
38×38 H5811 / 938×3874%~42 kg/m²1000×4040
38×38 H50 heavy-duty grating: 3-tonne forklift drive-over test

Load test on site

A 38×38 H50 heavy-duty panel was laid loose across a channel and a loaded 3-tonne forklift drove over it. The panel carried the load with no permanent deformation.

  • Model: 38×38 H50, bar top/bottom 11 / 8 mm
  • Vehicle: 3-tonne diesel forklift
  • Support: resting on both channel edges

For demonstration only; check the load table for your span and load class, or send us your dimensions.

50×50 and mini mesh models

50×50 and mini mesh models
ModelBar top / bottom (mm)Mesh (mm)Open areaWeightStandard panel (mm)
50×50 H509 / 750×5072%~23.5 kg/m²1220×3660
19×19 H306.5 / 519×19 / 38×3842%~18.5 kg/m²1000×4040
19×19 H386.5 / 519×19 / 38×3844%~21 kg/m²1000×4040

Values are approximate. Contact us for technical documents and certificates.

Mini mesh grating

Fine 19×19 mm mesh on top, 38×38 mm mesh below. The same moulded grating structure with a more closed top surface.

  • H30: open area 42%, weight ~18.5 kg/m²
  • H38: open area 44%, weight ~21 kg/m²
  • Bar thickness top / bottom 6.5 / 5 mm
  • Standard panel 1000×4040 mm
Mini mesh load values
Mini mesh composite grating module with fine 19×19 mm mesh
Dimensioned technical drawing of a mini mesh module, 19×19 mm mesh, 30 mm high

Stair treads and platform panels

Treads and platform panels are cut to size from moulded grating. The tread nosing is made anti-slip with a gritted surface.

  • Gritted, anti-slip tread nosing
  • Installation without a crane, lower transport costs
  • Fixed to the structure with M-type clips
  • Cut on site with a circular saw
Stacked brown composite stair treads with gritted surface
Platform and stairs with yellow composite handrails and grey grating floor

Drainage channel gratings

Grating covers for channels. The EN 124 standard defines load classes for channel covers; the class is selected for each project according to the location of use.

  • Rust-free, chemical-resistant cover
  • Colour on request
  • Technical documents and certificates on request
Grey composite grating cover laid over a channel with a loaded forklift driving across

Surface options

The same panel with four different top surfaces. The choice depends on how the floor is used and how much slip resistance it needs. The drawings show the top of the bar cross-section.

Close-up of a flat composite plate with embossed surface

  • Concave

    Standard surface. Slightly hollow bar tops reduce slipping.

  • Gritted

    Grit is bonded to the top surface; for floors that need extra slip resistance.

  • Smooth

    Sanded smooth top surface; for decorative and facade applications.

  • Covered

    The grating is bonded to a flat plate; the top surface is fully closed.

Colours

Standard colours are black, grey, yellow, green and blue. Other colours are produced on request.

Choose a colour and the panel in the image is shown in that colour. The rendering is approximate.

Try a colour

Moulded composite grating panel, approximate rendering in the selected colour
Choose a colour
Yellow moulded composite grating panel, close-up
A yellow panel from our own production. Colour swatches show approximate shades; contact us for a sample.
Grey grating panels stacked outdoors, blue panels behind
Grey panels, with blue panels behind.

Load table

Choose a model to see point (F) and uniformly distributed (q) load values by span. Values are approximate and are calculated for each project.

Model
600 mm

Clear distance between supports (mm). The arrow keys move to the next span.

38×38 H38, span 600 mm

Point load F
875 kg
Distributed load q
2,325 kg/m²

Values are approximate and are calculated for each project.

Schematic; deflection not to scale

38×38 H25

38×38 H25, span 300 to 750 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
3001,0005,190
4504501,550
600255655
750150345
38×38 H25, span 900 to 1200 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
900105197
100085140
12006080

38×38 H30

38×38 H30, span 300 to 750 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
3001,7009,250
4507502,700
6004251,160
750270580
38×38 H30, span 900 to 1200 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
900190341
1000150240
1200101140

38×38 H38

38×38 H38, span 300 to 750 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
3003,51018,500
4501,5005,450
6008752,325
7505501,180
38×38 H38, span 900 to 1200 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
900380680
1000305500
1200219295

38×38 H50

38×38 H50, span 300 to 750 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
30013,40071,850
4505,95021,150
6003,3258,800
7502,1004,500
38×38 H50, span 900 to 1200 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
9001,4752,630
10001,1901,915
12008291,100

19×19 H38 mini mesh

19×19 H38 mini mesh, span 300 to 750 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
3003,57019,040
4501,5705,600
6008802,350
7505641,200
19×19 H38 mini mesh, span 900 to 1200 mm
Span (mm)Point load F (kg)Distributed load q (kg/m²)
900391695
1000316505
1200219290

The span is the clear distance between the panel's two supports. For an exact value, send us your project's span and load conditions. How to read the load table

Quantity calculator

Enter the model, panel size and area; the estimated number of panels and weight are calculated as you type.

The calculator requires JavaScript. You can enter the model and area in the quote form; we will work out the quantity.

Mesh size and height, with unit weight.

Standard panel sizes for the selected model, width × length (mm).

Net area to be covered, at least 1 m².

Estimated result

Estimated number of panels
–
Estimated total weight
–
Estimated panel weight
–

Estimates only; waste and cutting allowance are not included. The quantity is the area divided by the panel area, rounded up.

Get a quote Send via WhatsApp (opens in a new tab)
Copies the quote message to the clipboard.

Model and sizes ready? We will prepare your quote

Send us the model, span and quantity, and we will choose the right panel together.

Get a quote Call: +90 532 273 52 50